DKS 6006 Swing Gate Actuator offers convenience and reliability in a compact, aesthetic design. This actuator mounts directly to your gate and pilaster, which simplifies installation and does not require concrete mounting pads. The screw-driven action is powered by a 24 Volt DC motor, eliminating the worry over hydraulic leaks, check valves or pumps. Built-in no-contact magnetic limit switches precisely control the start / stop speed of the actuator, all powered by a microprocessor control board.
Internal adjustable no contact magnetic limit switches.
Overlap feature for dual swing gate operation.
Magnetic lock output.
Fully enclosed gear-reduction to maintain lubrication.
24 VDC operating power.
Built-in battery back-up.
Separate control panel.
Keyed release for manual operation. Specifications: Gate Maximums: (Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
8 Ft. (2.43m) @ 1600 lbs (725.7kg)
16 Ft. (4.87m) @ 800 lbs (362.8kg)
18 Ft. (5.48m) @ 600 lbs (272.1kg) Speed: 90° in approximately 18-20 seconds
A newly designed barrier, aimed at meeting a wide range of requirements, from residential to commercial use.
Dedicated and intuitive electronics
Electronic equipment, integrated in the upper part, protected by a coloured plastic cover that enhances the visibility of the LEDs. Intuitive programming via buttons and display. Wide choice of operating logics and configurable parameters. Integrated OMNIDEC universal radio decoding system. System protection and BUS 2Easy accessories simple to connect using only two non-polarised wires.
Robust, reliable, high performance
The exclusive use of high quality components and materials makes the B614 a robust and reliable operator. A quadrilateral lever system with two reduction stages makes beam movement even smoother.
Maximum anti-crushing safety
A 24V motor with an integrated encoder provides a high degree of motion control and allows the reverse on obstacle safety standards to be met.
Complete range of accessories
Numerous accessories are available in order to personalise the product: beam lights and traffic light kit, hedge kit, joint kit, end foot and beam support fork. The beams, fitted with a rubber anti-impact profile, are available in both rectangular and rounded versions. Optional reflective stickers and LED lighting along the entire length of the beam (rounded or rectangular) make it easy to see even in conditions of poor visibility.
The CP-4 is a free exit system that opens your automatic gate so you and your visitors can leave without having to use a remote or key fob or punching a keypad to open the gate.
This is a self-contained system that connects directly to any gate operator without an external output board.
Buried beside the driveway, the CP-4 is hidden and vandal-proof. It covers a 12 foot wide driveway. Suggested cable length is 100′ when hooked to a gate operator for free exit. It only detects moving steel, preventing the gate from being tripped open by animals or blowing objects.
It accepts universal voltage (AC and DC), and works with any gate operator: solar or powered. It has the lowest stand-by current in the market, some 85-90% lower than its closest competition. It is the most solar friendly of anyfree exit system available.
Based on magnetometer technology
Covers 12 foot wide driveway from the side
Self-contained with no output board
Universal voltage AC and DC
Lowest standby current in the industry
Works with powered or solar gates
Two models: 3-wire or 5-wire
Five year warranty
CW-SYS is a wireless dual-purpose system that connects to existing security/home automation systems and gate operators.
Components (included with system): (1) Sensor puck; (2) Integrator; (3) Auger screws; (4) Batteries & clips; (5) Coaxial cable; (6) Terminal block screwdriver
Activates security/home automation systems and electric gate operators · Universal voltage AC and DC EASY TO INSTALL
Installs in under 1 hour (on average) without the need for trenching · No external transmitter/antenna · Install sensor above ground on immovable object; in the ground; or in driveway · Easily pair multiple sensors with multiple Integrators FOR ALL DRIVEWAYS
Short driveways: install in middle of the driveway and turn down sensor sensitivity · Wide driveways: install multiple units in driveway (12 ft. apart) or on both sides